Injection Molding Machine Stainless Steel Hopper Magnet Iron Remover Permanent Magnet Double

Basic Info.

Product Description

Precautions for use

1.Operating temperature
When the magnet exceeds the specified working temperature, it will cause the magnet to demagnetize or demagnetize. Please use it carefully.
2.Magnetizing direction
The magnet starts from the production of slices, which determines the magnetization direction and working surface of the product, which cannot be changed.
3.Operation Tips
Installation and use: magnets are not iron (iron is cast, like iron wire, with good toughness and continuous falling; magnets are made of powder fired, like ceramic properties, hard but brittle, no toughness, and will break when touched or dropped on the ground), The magnet is made of rare earth alloy crystalline material, which is hard and brittle, and is fragile. After magnetization, it is naturally attracted to each other without external force control, and it is easy to collide and break. Please pay attention to correct installation and use. Sturdy use, please do not use electric work, it is easy to squeeze and cause the magnet to break.
4.Majeure
Combined with the physical properties of the magnet, the magnet will have missing edges and corners during the production process. This is a normal phenomenon. If there are special requirements, please inform the relevant requirements in advance or proofing tests. In order to improve the rust and oxidation resistance of magnets, the plating color or gloss may be different from samples and production batches, which is normal.